Top 10 Power Rack Safety Bars – Strength Training Power Cages

As an Amazon Associate I earn from qualifying purchases.

1. CAP Barbell

#ad

Multiple Colors, CAP Barbell Power Rack Exercise Stand

#ad
CAP Barbell #ad - Trust: trust experience; cap has been a pioneer in fitness for over 30 years and has locations worldwide; Chances are if you have EVER worked out, you have used a CAP product.

Reliability: durable powder coat finish and industrial zinc hardware provide exceptional maintenance free durability. Construction the 11 and 12 gauge steel tubing allows this bench to meet and exceed ASTM testing standards; Tested Static weight capacity for catches is 500 pounds and 750 pounds for the pull up bar. Features: built in bar and weight storage; Double gusseted uprights provide exceptional stability and security; J cup catches to safely hold barbell. Specs assembled dimensions are 46 inches wide x 50 inches deep x 85 inches high.
BrandCAP Barbell #ad
ManufacturerCAP Barbell #ad
Height85.5 Inches
Length46 Inches
Weight61 Pounds
Width51 Inches
Part NumberFM-CS7000F
ModelFM-CS7000F
Warranty30 day limited manufacturer warranty

2. TDS

#ad

TDS Safety Bars for Power Racks with 2" Sq. Tube

#ad
TDS #ad - 1000 lb. Self Locking. Weighs 17 lbs a pair. Tube. 1" solid steel pin - 36" long. Fits on all power racks with 2" sq. Capacity.
BrandTDS #ad
ManufacturerTDS #ad
Part NumberH-92575-2R

3. Yes4All

#ad

Lift Safety Fit 1" Tubing Pair, Yes4All Safety Spotter Arms for 2x2 Power Rack, Safety Squat Bar Extension

#ad
Yes4All #ad - 95-inch bar to lock on and off the rack for height adjustment in a breeze, while the secure tightening knob adds extra strength & safety for the spotter pin. Just attach a pair of spotter pins in place, overhead press and squat with safety and confidence.

Thick steel construction: constructed of heavy-gauge steel plate and covered with a Black paint coating finish, our safety bar extension stands for years without corrosion or breaking apart. Easy height adjustment: yes4all safety bar extension comes with a 0 Universal design – fit 2-inch x 2-inch power rack: Yes4All power rack safety bar extension can be compatible with 2-inch x 2-inch power rack with 1-inch Hole.

Uhmw plastic pad included: the safety bar extension is fully equipped with a thick padded plastic layer to reduce noise and protect your barbell from damage in case you have a failed rep. Heavy capacity load: due to the strong construction, like bench pressing, you can perform countless exercises, Each safety bar can withstand up to 750lbs.
BrandYes4All #ad
ManufacturerYes4All #ad
Warranty1 Year Warranty

4. Yes4All

#ad

J Hook Weight Rack / Fitness Racks J Hook, Fit 2x2 inch Square Tube Pair, Yes4All J-Hooks Barbell Holder for Power Rack

#ad
Yes4All #ad - Fit most 2-inch x 2-inch power racks but not all – please check your rack dimensions before purchasing to avoid any unwanted return: Yes4All 2x2” Power Rack J-Hooks are designed to be compatible with 2-in x 2-in power racks with 1-in hole.

8mm thick rubber pad included: the J-Hook is fully equipped with a thick padded rubber layer to reduce noise during your workout session and protect your barbell from damage. Sport type: Sporting Goods. Heavy capacity load: due to the strong construction, each J-Hook can withstand 500lbs, like bench Pressing, for the total weight capacity of the two Hooks up to 1000 lbs. Now you can perform countless exercises, Overhead Press.

Department Name: Exercise Machine Attachments. 6mm thick steel construction: constructed of 6mm thick steel plate and covered with black paint coating finish, our Power Rack J-Hook stands for years without corrosion or breaking apart. Easy height adjustment: yes4all j-hook comes with 1-inch bar to lock on and off the rack for height adjustment in a breeze, while the shortened design is easy for you to rack or unrack the bar.
BrandYes4All #ad
ManufacturerYes4all #ad
Part NumberUHFC
ModelUHFC
Warranty1 year

5. HulkFit

#ad

800-Pound Capacity, Spotter Arms Dip Bars and Pull Up Bars, HulkFit Multi-Function Adjustable Power Rack Exercise Squat Stand with J-Hooks

#ad
HulkFit #ad - Constructed with 12 gauge steel, this squat stand has a 800lb weight capacity. The 2. 5in x 2. 5in frame offers greater stability. Two weight plate holders upright designed for convenience and stability. Product weight: 110 Pounds. Assemble dimensions: 81"height, 44" Width, 46" Depth. Included are two spotter arms/dip bars with safety locks and two J-Hooks. Two pullup bars at different diameters are included and mounted at your preferred height.
BrandHulkFit #ad
ManufacturerHulkFit #ad
Warranty2-Year Warranty

6. Yes4All

#ad

Yes4All J-Hooks Barbell Holder for Power Rack, Fit 2x3 inch Square Tube Pair, J Hook Weight Rack/Fitness Racks J Hook

#ad
Yes4All #ad - 6mm thick steel construction: constructed of 0 Uhmw plastic pad included: the j-hook is fully equipped with a thick padded rubber layer to reduce noise during your workout session and protect your barbell from damage. Additional lock knob: each 2x3” j-hook comes with a lock knob to help better tighten the hooks in place around the rack’s tubes for extra security and prevent hook slippage.

Simply secure it in place and safely perform countless exercises, Barbell Shrug. Note : because of many types of power rack, customers should check their Power rack square tube dimension before purchasing to avoid any discomfort. 2-inch x 3-inch power racks compatible but not all – please check your rack dimensions before purchasing to avoid any unwanted return: Yes4All 2x3” Power Rack J-Hooks are designed to fit 2-in x 3-in power racks with 5/8in holes or larger.

25-inch thick gauge steel plate and covered with black paint coating finish, our 2x3” Power Rack J-Hooks to last for years of heavy usage without corrosion or breaking apart. Heavy capacity load: due to the strong construction, like Bench Pressing, overhead Press, with the total weight capacity of the two hooks up to 1000lbs.
BrandYes4All #ad
ManufacturerYes4All #ad
Part NumberWNBF
ModelWNBF
Warranty1-year warranty and 30-day return

7. Titan Distributors Inc.

#ad

Titan Fitness Strap Safety System | X-2 Series | 24" Depth

#ad
Titan Distributors Inc. #ad - Compatible with x-2 Series Power Racks 24" Depth. Slope the strap heights to have the bar roll safely away from you. Fully adjustable heights for either side of strap. 2" wide reinforced nylon straps, safety rated for a total strap system capacity of 6, 200 LB. Great for rack pulls. Saves your knurling and bar from damage. Quieter than pipe/pin safeties.
BrandTitan Distributors Inc. #ad
ManufacturerTitan Distributors Inc. #ad
Length0 Inches
Weight22 Pounds
Part Number24X2STRAPv2

8. Ollieroo

#ad

Ollieroo Set of 2 Steel Hooks Barbell Holder for Power Rack Power Cage, Fit Most of 2" x 2" Square Tube with 1" Hole

#ad
Ollieroo #ad - Brand: Ollieroo. Fit most 2" x 2" power racks with 1'' holebut not all: the ollieroo hook power Rack holder can be compatible with 2-inch x 2-inch power racks.

Easy lock on and off. 3mm stick on foam pads included: the 3mm stick on pads help to prevent the barbell from damages and to reduce noise during your workout session. Heavy capacity load: due to the strong construction, each holder can withstand 500lbs, for the total weight capacity of the two holders up to 1000 lbs. Sturdy and heavy duty: Strong and thick Steel plate construction. If our barbell holders don't fit your power rack, contact us freely to solve the problem.
BrandOllieroo #ad
ManufacturerOllieroo #ad

9. papababe

#ad

Papababe Power Rack Steel J-Hooks, Power Cage Attachment, fit 2x2 inches Square Tubes Power Rack

#ad
papababe #ad - Please check your rack dimensions before purchasing. Thick steel construction: our J-hooks are made of 5 mm thick steel plate with black paint coated finish to ensure a long time.

Arms longer than others: 6. 7 inches long arms make it easy for you to put your barbells on our J-Hooks. And they can protect you from injury. Uhmw plastic pad included: each J-Hook inside is equipped with a rubber pad to reduce the noise and protect your barbell from damage while working out. Size: papababe power cage j-hooks are only comparable with 2x2 inches power racks with 08 inch hole. No need to focus more on putting your barbells down. Heavy capacity load: due to the strong construction, each J-Hook can withstand 500lbs and the totals can hold 1000lbs.
Brandpapababe #ad
ManufacturerPAPABABE #ad
Height1.2 Inches
Length9.1 Inches
Weight6 Pounds
Width2.2 Inches

10. Valor Fitness

#ad

Valor Fitness RG-20 Step Plate Accessory

#ad
Valor Fitness #ad - Please note that valor fitness accessories are designed to fit Valor Fitness products only. The rg-20 is compatible with valor fitness RIGs and BD-57 with 3” x 3” frames.

Additional- laser cut valor fitness logo. Safe- measures 6. 25” x 4. 5”, offering ample space to safely step up and reach parts of Valor Fitness RIGs or BD-57 Rack that are not easily reached from the ground. Sold individually. Secure- 1” peg measuring 3” in length securely locks into upright holes of Valor Fitness RIGs and BD-57 Rack. Heavy duty- constructed of 3-gauge steel for strength and durability while matte black finish provides a firm grip surface for maximum safety.
BrandValor Fitness #ad
ManufacturerValor Athletics Inc. #ad
Height6 Inches
Length8 Inches
Weight5 Pounds
Width6 Inches
Part NumberRG-20